Early design concepts of C-1 and C-5 versions of the Saturn launch vehicles

NASA announced selection of the lunar-orbit-rendezvous landing technique at an 11 July 1962 press conference. left to right James E. Webb, Robert C. Seamans, Jr., D. Brainerd Holmes, and Joseph F. Shea

Harry C. Shoaf (Space Task Group Engineering Division 15 November 1961 of a proposed lunar lander to be used with an advanced version of the Mercury spacecraft

concept of a small lunar lander during descent to the surface of the moon, as proposed by Langley Research Center employees in October 1961

Shea uses models to demonstrate how the lunar module would dock with the command module

Rocket Comparison

Lunar orbit insertion

REF: 2-903-6 SA-2 LAUNCH AT CAPE. IGNITION OF ROCKET (SATURN 1 VEHICLE)

SA-2 erected on launch pedestal

Wernher_von_Braun_confers_with_Brainerd_Holmes_and_Nicholas_Golovin

The impact facility at North American was used to drop-test the CM

Selection of Little Joe II completed the Apollo family of launch vehicles.

Scott Carpenter, John Glenn, and Walter Schirra in 1963 inspect a full-scale mock up of the Apollo CM

North American Aviation Stormy,

Interior of a partial full-scale mockup of the Apollo command module

major parts of the command module structure

General Electric employees monitor activities of a spacecraft test in the automatic-checkout-equipment spacecraft control room in 1965

comparison of spacecraft and launch vehicle configuration

Apollo tracking network in 1966. Radar stations with large antennas for continuous tracking and communications were at Goldstone, California; Madrid, Spain; and Canberra, Australia

Full-scale model of the command module, above- the strake aerodynamic devices may be seen at either side of the spacecraft just above the aft heatshield

Removing LM from S=IVB stage

On 16 November 1963 in Cape Canaveral’s Blockhouse 37, NASA’s new manned space flight chief George Mueller

Communications with the moon as the earth turned. Astronauts on the moon’s surface also could talk to one another

download

The cabin section (or primary structure) of the CM is assembled at North American in 1965

The CM probe would slip into the LM’s dish-shaped drogue, and 12 latches on the docking ring would engage, to lock the spacecraft together, airtight

Full-scale model of the service module, resting on a mockup of a spacecraft-lunar module adapter, with panels off to reveal part of the internal arrangement

Jettison of the launch escape system (right) after successful launch, also pulls away the boost protective cover that protects the windows from flame and soot

On the drawing of the launch escape system at upper right, the canard aerodynamic devices are near the top of the escape tower

VonBraunMuellerReesSA6

SA5_launch

sa-6-spacecraft

sa-6-dem

SA-6 spacecraft and launch vehicle ready to go

SA-6 on pad

SA-5Section cuts

SA-5

SA-5 S-IV stage

SA-5 on pad

SA-5 Demensions

apollo_sa7_launch

apollo_sa4

a-002

A-001_launch_1964_05_13

Pad_abort_test_1-237×300

Little Joe II- On Pad, Complex 36 (December 7, 1964)

BP12

Apollo_LJ_II_flight_profile

a-001 bp-12

A pad abort test at White Sands, left, helped determine that the launch escape system could propel the Apollo command module away from danger if a Saturn launch vehicle explosion should threaten

A desert area at White Sands Test Facility, New Mexico, was used for testing the spacecraft propulsion system module

6-NASA engineers in 1964 decided that astronauts could stand in the lunar module cabin during the trip to the lunar surface. Note triangular windows

7-Proposed sleeping positions for astronauts on the moon

5-Mockup of lunar module cabin with seats

4-The drawing of the stage indicates positions of components

3-underside of the lunar module descent stage shows fuel tank installation

2-Administrator James Webb examines models of the lunar and command modules in docked position

1-Lunar module generations from 1962 (above left; the vehicle originally proposed by Grumman) to 1969

3-improved lunar module features – ladder, porch, hatch, and rendezvous window

2-he addition of a ladder on a landing gear leg made the task much easier

1- Astronauts found a knotted rope from the lunar module difficult to climb down (or up)

5-Removing the LEM

4-ApolloSpacecraftLMAdapterDiagram

3-Apollo_Spacecraft_diagram

2-Tm-1 mockup of the Lunar Module

1-lm-6-rendezvous-radar-antenna-assy-sm

4-SIV-SIVB

3-Saturn 1b-V

2-Cutaways

1- SIV_rocket_stage

4- Saturn_SA10_launch

Saturn_SA8_launch

2- The SA-9

8- Pegasus_Deployment_sequence

7- Cutaway views show the interior of the command module (for clarity, the center couch is not shown)

6- Pegasus Deployed

5- Pegasus Stowed

4- Saturn_SA10_launch

3- 1230_Lunar_module_LTA-2_R

2-Disher_John_

1-Lunar_Module_diagram

2-NASA_Group_1_and_2_Astronauts_Photo_With_Autopens

2-Back row- See, McDivitt, Lovell, White, & Stafford. Front row- Conrad, Borman, Armstrong, & Young

1- Project_Mercury_AstronautsBack row- Shepard, Grissom, Cooper; front row- Schirra, Slayton, Glenn, Carpenter.

Group4Astronaut

4-Group 4 L-R- Garriott, Gibson. Front row, L-R- Michel, Schmitt, Kerwin.

3-Astronaut_Group_Three_-_GPN-2000-001476

5-Back row, from L-R- Swigert, Pogue, Evans, Weitz, Irwin, Carr, Roosa, Worden, Mattingly, Lousma. Front row, from L-R- Givens, Mitchell, Duke, Lind, Haise, Engle, Brand, Bull, McCandless

AS-203_launch

AS-202_launch

AS-201_launch

Apollo-Saturn 201 mission – launch, recovery