Space Rocket History Logo
Space Rocket History Podcast Welcome to the Space Rocket History podcast

Episodes Tagged with "Yeliseyev"

Posted on December 3, 2015

With the success of Kosmos 146 and in spite of the failures of the first three 7K-Ok’s it was now time to plan for a Soyuz manned mission. The planned involved the launch and docking of two piloted Soyuzes. Soyuz 7K-OK production model number 4 was a...

VladimirKomarov_sketch

7k-0k and l1

Kosmos-146

Posted on December 10, 2015

“I was the last one to see him alive and I told him ‘See you soon!’” Yuri Gagarin, recalls bidding farewell to his friend Kamarov in Soyuz 1.

3-soyuz1_01

2- Soyuz 1

1-GagarinKamarov

Posted on December 17, 2015

“It’s a terrible scene. Komarov burned up. All the instruments burned. We must quickly find out what prevented the main parachute from unlatching.” Chief Designer Mishin after he arrived at the Soyuz 1 crash site.

3-VladimirKomarov_Soyuz1

2-soyuz-1-crash

1-Soyuz 1 crash site

Posted on January 7, 2016

After 1957, the Soviets became accustomed to achieving “world firsts” in space accomplishments. Nevertheless, 10 years later they were not confident that they could pull off the world’s first fully automatic rendezvous and docking of two un-piloted S...

3-Igla_docking_system_antennas-fr

2-Armen Sergeyevich Mnatsakanyan Main designer of Igla and Kurs

1-Mishin at Baykonur in 1967

Posted on November 22, 2017

Finally, on April 25, 1969 during a meeting of the Soyuz State Commission, it was decided that the solo and docking flights outlined for 1969 by design bureau OKB-1 would be combined into a joint flight of three spacecraft.  The plan was to fly Soyuz...

P3-s678crewbild

P2-Valeriy_N._Kubasov

p1-Georgy Stepanovich Shonin

Posted on November 29, 2017

The Vulcan device consisted of two major units. The first unit included various welding devices and a turn-table with samples of metals to be welded. The second unit consisted of an electric power pack, a protective shield which covered the welding u...

P3-The Vulkan Welding Unit was divided into two sections—one containing the command and power systems and the other holding the three welding devices

P2-Soyuz 8 on the pad

P1-Crew of Soyuz 8

Posted on November 21, 2019

The objective of the Soyuz 10 mission was to deliver and return to earth the first crew of Salyut 1.  The Soyuz was to hard dock with Salyut 1 and then the crew was to transfer internally to the station.   ShatalovYeliseyevRukavishnikov

P3-rukolai

P2-yeliseye

P1-ishaalov

Posted on November 28, 2019

“They can’t approach at that rate,” fretted Mishin. “Why aren’t you doing anything? Tell the crew what to do!” “We don’t need to do anything; deceleration will begin now,” Rauschenbach reassured Mishin. Soyuz 10 RolloutSoyuz 10 Vertical Soyuz 10 Lau...

P3-soyuz-10_launch

P2-soyuz-10_pad

P1-soyuz-10_rollout

Posted on December 5, 2019

… There was no provision for the possibility of undocking if the entire docking cycle had not been executed … Boris ChertokSimulated DockingDeparting Salyut 1

P3-soyuz-10_salyut

P2-Soyuz-10-Salyut-1

P1-chertok

Posted on December 12, 2019

On May 4th, 1971 the prime crew of Soyuz 11 was confirmed to be Leonov, Commander; Kubusov, Flight Engineer; and Kolodin, Research Engineer. Their assignment was to spend between 30 and 45 days on board Salyut 1. Alexei Leonov – CommanderValeri Kuba...

P1-Alexei_Leonov

P3-Kolodin

P2-Valeriy_N._Kubasov

Posted on December 6, 2024

According to George Low, the Soviet mission operations control room was quite large – it contained 16 two-man consoles, thus allowing them 32 flight controllers. In addition, there was a back row of consoles which were used for personnel such as the ...

P1-star-city-russia

P2-Cosmonaut-Training-Center-Star-City-Aerial-View

P3-MCC-Kaliningrad

Posted on December 20, 2024

For the first time, the Soviet Union publicly announced the crew assignments for a Soyuz mission before the flight. Previously, cosmonaut identities were kept secret until after their flights.

P1-ac

P3-Rest stop during trip from Star City to Moscow provides crewmen with a chance for a snowball fight November 1973

P2- ASTPmockat 73Paris

Posted on January 10, 2025

The American astronauts acknowledged the necessity of enhancing their Russian language proficiency. They observed that their Russian counterparts, had demonstrated a remarkable commitment to learning English, dedicating 6 to 8 hours each day to indiv...

P2-Spacecraft Simulators at Star City

P1-Interior view of environmental control system

P3-Docking systems installed on a simulator

Posted on January 24, 2025

Soyuz 16 served as a comprehensive rehearsal for the Soviet contribution to Apollo-Soyuz Test Project (ASTP).

P1-soyuz16Crew

 ÓÒÏÓ̇‚Ú ÕËÍÓÎ‡È –Û͇‚˯ÌËÍÓ‚

P2-Anatoli Filipchenko

Posted on February 7, 2025

The origin of the Soviet’s concern, regarding the potential impact of the Apollo Command Module’s Reaction Control System (RCS) thrusters on the Soyuz spacecraft during docking maneuvers, can be traced back to a Skylab film.

P1-maxresdefault

P2-Apollo Mission Sim

P3-ASTP transfer graphic Encylopedia Astronica

Posted on February 21, 2025

Eight cosmonauts arrived in Washington, D.C. on February 7th, 1975 to start their final training session in the U.S. as the technical specialists argued whether the spacecraft was ready or not.

P1-Disney World

P3-ASTP Soyuz spacecraft are being readied for the joint mission

P2-Alexei Leonov enters the Apollo command module being readied for ASTP